Boats Made in the USA

Engineered for Life  Made in the USA

Best Boat Company


Jordy Anderson

As my customer, you will have a direct line to my office. I am always open to new ideas, and I’m committed to resolving any issues that may arise regarding your SEALTM Boat experience. My goal is to make SEALTM Boats USA the best boat company it can be.
Jordy Anderson, President


Boat Models

SEAL Boats USA » Tiller Model » Boat Model Details
14.5-foot, four person boat with a 40-gallon fuel tank and 50 maximum horse power. All-aluminum, all-welded hull filled with 70 cubic feet of Coast Guard approved foam flotation. Ample storage below deck. Custom built with choice of deck plan, color and accessories.


Boat length 14.50 ft.
Overall length with bow pulpit 15.83 ft.
LOA with 50 HP Yamaha motor & bow pulpit 16.90 ft.
Boat beam with rub rail 7.50 ft.
Transom height 20 in.
Draft with fuel, water & engine ±12 in.
Displacement (weight) 7,234 lbs.
Displacement (volume) 115.92 cubic ft.
Tube diamter 23 in.
Tube volume 70 cubic ft.
Foam capacity (4,410 lbs. of foam flotation) 70 cubic ft.
Bilge pump capacity 1,250 GPH
Fuel capacity 40 gal.
Water capacity 9 gal.
Max. horse power 50HP
Max. persons 4 (745 lbs. total)
Max. weight capacity 1,447 lbs.
Hull weight with battery 1,400 lbs.
Hull weight + 50HP Yamaha 4-stroke engine 1,646 lbs.
Hull weight + engine + fuel + water 1,989 lbs.
50HP Yamaha 4-stroke engine weight 246 lbs.
W1730S Rolls Axle trailer weight 430 lbs.

Standard Equipment

  • Choice of any marine-grade powder coating
    (metallic finish is extra)
  • Standard aluminum rub and grab rails
  • Hydraulic lift seat
  • 1/2-in. starboard deck surface
  • 1-in. starboard bow pulpit
  • 1/2-in. starboard aft deck step covers
  • 115 cubic feet of Coast Guard approved, 2-pound density foam in all the sponsons (making the boat unsinkable)
  • Bilge and deck drain plugs
  • 4 SEALTM 1/2-in. dock lines
  • 2 SEALTM towels
  • Survival and safety package
  • 1 front trailer/anchor eye and clevace
  • 1 bow-lifting and 2 rear-lifting eyes with clevaces
  • Built-in 40-gallon aluminum fuel tank
  • Racor fuel/water separator filter
  • 316-stainless-steel rub rail protectors
  • Self-bailing, sealed deck
  • Aluminum propeller

Plumbing System

  • 1,250 GPH bilge pump
  • Water pump/freshwater washdown
  • Built-in 9-gallon aluminum water tank
  • Water spigot in seat

Lighting System

  • Acon bow and stern navigation lights
  • 4 interior LED cockpit lights
  • 2 rear LED step lights

Electrical System

  • Built-in battery in seat box
  • On/off switch with lock
  • Automatic bilge pump
  • Electric fuel gauge
  • 30-amp master circuit breaker

Interior Finish

  • 1/2” dolphin gray starboard decking (other colors available)

Deck Hardware & Exterior Equipment

  • 316-stainless-steel gas fill
  • 316-stainless-steel water fill
  • 4 316-stainless-steel lift clevaces
  • 2 Armstrong rear round hatch covers
  • 2 SEALTM aluminum rear hatches
  • 1 SEALTM powder-coated front chest plate

Optional Equipment

  • Bimini top in any SunbrellaTM color (includes flag and pole)
  • Radar arch (includes flag and pole)
  • Fishing rod holders
  • Rolls Axle trailer with magnesium wheels
  • Trailer boat tie-downs
  • Metallic powder coat
  • Fenders
  • Stainless steel propeller
  • Hand made teak bow pulpit
  • Stainless steel anchor on bow pulpit
  • Extra dock lines
  • SEALTM carpet
  • SEALTM floor mats
  • Seat cushion
  • High-polished aluminum front chest plate


14.5 SS Tender

Boat + seat box + battery + electrical package* $25,900
50HP Yamaha 4-stroke electric start engine with PT&T $7,260
Rolls Axle 1730W Trailer $2,490
Total $35,650
Special Package Price $33,990

*Electrical package includes cockpit lights, bilge with auto switch, running lights, fresh-water washdown, water pump, fresh water tank.

Prices effective 10/1/2010 and are subject to change without notice.

Request More Information

Enter the code shown above in the box below